Anybody know the part number for the fat blade pigtail wires for the auxiliary switches that output from the gray connector under the hood for my 2019 I30Fw. I can’t find the ram part number. The left over parts from the up-fitter kit were not in the RV when delivered.
Anybody know the part number for the fat blade pigtail wires for the auxiliary switches that output from the gray connector under the hood for my 2019 I30Fw. I can’t find the ram part number. The left over parts from the up-fitter kit were not in the RV when delivered.
To my knowledge (which can be limited at times) the individual wires are not available from Mopar. You have to buy the whole upfitter wiring “kit” to get them. It’s also my belief that it is Mopar part number 68209998AC. Like this random one I found on eBay:
Anybody know the part number for the fat blade pigtail wires for the auxiliary switches that output from the gray connector under the hood for my 2019 I30Fw. I can’t find the ram part number. The left over parts from the up-fitter kit were not in the RV when delivered.
To my knowledge (which can be limited at times) the individual wires are not available from Mopar. You have to buy the whole upfitter wiring “kit” to get them. It’s also my belief that it is Mopar part number 68209998AC. Like this random one I found on eBay:
Anybody know the part number for the fat blade pigtail wires for the auxiliary switches that output from the gray connector under the hood for my 2019 I30Fw. I can’t find the ram part number. The left over parts from the up-fitter kit were not in the RV when delivered.
Let me know what you need, I may have some spare connectors
__________________
Tundra 2017 CrewMax retired for a RAM Laramie 2500
FR 2017 T2460 EVO
Andersen sway control
The OP was able to get help from another forum member to obtain a couple of the pig tails for the Upfitter and am hoping to use this string to achieve the same.
I did get my kit but none of the pig tails are suitable for a fog/spot wire connection being #22 gauge wires. I need one for #14 or #16 and they may either have been purloined although at least 2 were used for the Dynamax install.
Has anyone obtained the equivalent or has a spare they are willing to part with?
__________________
2000 Sportsmobile E350 EB
2006 Renegade/Peterbilt K1854 and T1220
2021 Isata 5 28SS Explorer
The OP was able to get help from another forum member to obtain a couple of the pig tails for the Upfitter and am hoping to use this string to achieve the same.
I did get my kit but none of the pig tails are suitable for a fog/spot wire connection being #22 gauge wires. I need one for #14 or #16 and they may either have been purloined although at least 2 were used for the Dynamax install.
Has anyone obtained the equivalent or has a spare they are willing to part with?
Are we talking Ram or Ford?
The Ram 1/4" are 12Ga wire.
__________________
Tundra 2017 CrewMax retired for a RAM Laramie 2500
FR 2017 T2460 EVO
Andersen sway control
Its the RAM 5500 and #12 is probably what they used. But as I wrote, none in my package and the replacement kit is $40 but on back order at 2 dealers that I approached.
__________________
2000 Sportsmobile E350 EB
2006 Renegade/Peterbilt K1854 and T1220
2021 Isata 5 28SS Explorer
Its the RAM 5500 and #12 is probably what they used. But as I wrote, none in my package and the replacement kit is $40 but on back order at 2 dealers that I approached.
Sent you a PM
__________________
Tundra 2017 CrewMax retired for a RAM Laramie 2500
FR 2017 T2460 EVO
Andersen sway control
"If someone had a close up pic of all sides might be able to match it up with either the links or the mouser catalogue"
They are actually an assembly with a boot to fit the upfitter plugs.
I know, if I knew the correct terminal I can order the terminal dirt cheap along with the seals. I have damn near every crimper under the sun! It would be fun to use them once in a while.
Linear Mode
