Isata 3 Equalizer Leveling System Question

[papazeus]

Hi Brian - we are waiting for our Isata 3 to be finished being built. I would like to buy some SnapPads for the unit in the meantime. Does the Equalizer system you install on the I3 have octagonal shaped landing feet? Or are they round?

I read (somewhere on the forum) one of the best things about owning a RV is buying all the accessories. We I must say it's really enjoyable until the credit card statement gets sent every month! hahahaha.
Thanks!

[Sandiegodoug]

This is what’s on our isata 3 2018
About 7 inches from side to side

[milkman55]

Here is the link to the Dynamax Sprinter specific product. Looks like an Octagon. I would call Equalizer Systems and see if they have snap pads specifically for their product. They have been very helpful when I called.

https://equalizersystems.com/product...-dyanomax-mfg/

[caswelld]

Originally Posted by milkman55

Here is the link to the Dynamax Sprinter specific product. Looks like an Octagon. I would call Equalizer Systems and see if they have snap pads specifically for their product. They have been very helpful when I called.

https://equalizersystems.com/product...-dyanomax-mfg/

It's hard to believe that leveler system weighs nearly 200 lbs.

[papazeus]

Good idea - I will contact Equalizer direct & hopefully they can help me out. Thanks

[A32Deuce]

Snap pads is not ready yet for the 7 inches. I am waiting for them for mine. Sent an email to them and they did not know about the 7 inch on both ends. I had them installed at the factory on my SunSeeker. Best improvement. Only thing I did different was put all the working equipment in a compartment to keep out from underneath.