Isata 4 Factory Installed Appliances and Acc.

[Reid W]

BClemens---

I have a single sheet that lists factory installed appliances and accessories. It does not show Falcon Heater Pads. In my paperwork, there is an Falcon owner's manual. Is it possible that a pad is in fact installed but not on the list?

My I4 is #1658.

Where would the on/off switched be located?

The other night, there was a significant drain on the batts- wasn't connected to shore power at the time- don't know what the drain was- maybe heater pad?

Thanks, Reid.

[bclemens]

more likely you got an owners manual without the heating pads. We use fan forced air from the furnace on the 4, not heat pads...partly because I/we think they're not all that functional.

1. they are 12V, heavy draw.
2. They have a low voltage cutout so they don;t drain the batteries too far, so they could go off when you need them.
3. when you would possible use them most (driving) you would have the furnace on, which should be pumping air in there, plus you are sloshing around.