I tried to reply to a similar topic on this that had a Dynamax SS rock guard picture but it was too old on the forum to allow comment. But the picture of the factory rock guard looked to me to be pretty narrow with a lot of room above it for stuff to get by. Any ideas on a good rock guard of mud flaps. My 2020 Isata5 36DS appears to have rock guard hangars on the frame.
Maybe theres a reason what you have seen as OEM is
narrow.
I recently had an Ultra-Guard 94 x 20 installed mounted on 96" angle iron, welded to the hitch. The rock guard is attached by about 20 fasteners to the angle iron. It's a universal fit, available in other depths I believe.
Less than 100 miles on using it but should work within reason to take some steam off of road debris.
__________________
2006 Sunseeker 2860DS Ford V10 5 speed with Tow/Haul
Winegard T4 In Motion Satellite Dish
Furion Rear Camera, RecPro 70" Recliners
Mohawk Luxury Vinyl Plank Flooring
2013 AWD Acadia Denali, Blue Ox Equipped
Make sure there is clearance around the guard! On my DX3 that sucker hits the ground all the time, especially when in dirt areas. I’ve seen it totally horizontal. You need room for it to move, slide, and cock to the side or else it would be damaged in those situations. At least mine would have been.
Linear Mode
