Possible Delamination
2024 Europa 32KD
I noticed two areas of the orange peel texture material adhered to roof starting to come up along the left and right edges of the roof from front to rear cap about a month after delivery. Didn't think anything about it because nothing was mounted near the edge.
8 months later I'm thinking of adding Starlink to the roof and I notice it bubbling up even more towards the center. The delamination appears to be more pronounced and is now in an area where I intend top mount the Starlink or more Solar. When I push down on it, it comes back up and I can hear the adhesive below releasing and trying to stick to the wood below. At the white/gray paint line, it goes up and down more than a 1/4". In the second pic, my fingers are around where the upper edge of the de-lamination is and it goes up and down about 1/8".
I'm concerned about leakage after solar installation along the left and right edges are and was wondering if anyone has experience with this delamination. Is this normal or warranty issue?
|