Precision Circuit Control Panel

[4XGLMPR]

Sorry I tried to search to find out how to get my Precision Control Panel to come back to life. I have plenty of power and battery switch is on so my coach is getting power. I am plugged in and can use my App but the touch pad board is dead. Cant remember how to get it to boot up, if this is possible. Anyone able to give me a hint. My coach has been sitting for 3 weeks with the battery switch turned off.

Thank you.

[bclemens]

I know there was a batch of early boards that needed some resistor or something. If they got low low voltage they would not boot back up unless you unplugged it and then plugged it back in. I would give Precision Circuits a call. They can walk you through it...and if it is one of those boards, send a replacement.

[4XGLMPR]

Originally Posted by bclemens

I know there was a batch of early boards that needed some resistor or something. If they got low low voltage they would not boot back up unless you unplugged it and then plugged it back in. I would give Precision Circuits a call. They can walk you through it...and if it is one of those boards, send a replacement.

Thank you sir.

[DavidMort]

pop the corners off with small flat head
remove 4 corner screws
unplug data cable
plug data cable back in

sometimes works

On our 3rd control panel I think -- I lose track.

[ckabrahamson]

On mine the data cable was loose. Plugged it back in and it worked fine.

[4XGLMPR]

Originally Posted by DavidMort

pop the corners off with small flat head
remove 4 corner screws
unplug data cable
plug data cable back in

sometimes works

On our 3rd control panel I think -- I lose track.

Did what you said and it is working now. Seemed loose. Time will tell. Thank you.