Precision Plex "No Digi-Level module Comm

[clockcuff_66]

Anyone seen this one? Rebooted the system and still received the same error. All of the other functions appear to be functioning.

[Motorhome1]

I got this message today when changing my chassis batteries and did not get a good connection on one of the batteries. Looks like you’ve lost power to one battery monitoring module. Not sure where all the modules are on your model. Only thing I can suggest is to check all your battery connections. Sorry I can’t be more help

[clockcuff_66]

Thanks MH1 - I figured it out and it was self inflicted. I had disconnected the (for lack of a better term) phone line connected to the master lite switch in my wet bay last time I had it out. They all must run in series for the circuit to be complete. Now we know....

[Motorhome1]

Glad you fixed it. It’s all experience

[kaulick]

Had this happen to us about 3 months ago. In the wet bay compartment check the R11 cable going to the panel. If it comes unseated, you get that message on the main panel.

You can open up the panel under the bed, plug in a R11 (phone data cable) into the panel and run that cable through the bedroom window and plug it into the wet bay panel. If that fixes it, you have a bad R11 cable.