Brian, during my Lithium conversion this weekend I found something that didn't seem quite right. Where is the main 12VDC + for the inverter input to be fed from? Mine was landed on one of the two the chassis batteries. Shouldn't is be fed from the house batteries after the main disconnect?
I believe the inverter feed is fused, not switched, due to potential current draw / feed. This provides several advantages and some related disadvantages.
Should be, but it goes to the disconnect and some posts...I'd have to see a picture to say otherwise.
There are two disconnects now (at least today) one for solar, one for the house (three if you consider the chassis disconnect).
__________________ If "Search this Forum" does not yield answers, please post questions as a "New Thread" (instead of asking privately) so others can benefit from the answers.
Linear Mode
