Wet Bay and Electrical Hatch Cover Sizes please

[twp5253]

22XL and its 200 miles away from me. I want to order the Etsy hatch covers for the 50 amp and one for the 1/2 water line but don't know the size of the hatches for each bay. Thank you

[MoJoe1003]

4” for water line and 50 amp electric hatch

[twp5253]

Originally Posted by MoJoe1003

4” for water line and 50 amp electric hatch

This is what I got back from CreativeRVSolutions;

Most I've made for Dynamax have been 4" for electric and 6" for sewer. I can make the Sanicon opening and water and a plug for sanicon.


Are we sure the hatch opening in the wet bay is 4"?

[MoJoe1003]

4 inch for the water only hatch. I don’t leave my Sani-Con line out when camping, so I have no need for the cover for the larger hatch that is under the Sani-Con unit. I only pull the sewer line out to dump and then put it back in the wet bay when complete.

[twp5253]

Originally Posted by MoJoe1003

4 inch for the water only hatch. I don’t leave my Sani-Con line out when camping, so I have no need for the cover for the larger hatch that is under the Sani-Con unit. I only pull the sewer line out to dump and then put it back in the wet bay when complete.

Got it. I probably will do it that way but I like that they can make a cover with a plug for the sanicon so I don't have to deploy that. Ready to order now! Thank you all!

[MoJoe1003]

Yeah, their stuff is very nice and works great. Those Sani-Con hoses are very difficult to find, so I don’t want to leave it out in the sun when it is not necessary. It is so easy to take out when needed, complete the dump and put it back away. Way easier than the big stinky slinkies since it is always hooked up at the source and caps cleanly.

[twp5253]

Originally Posted by MoJoe1003

Yeah, their stuff is very nice and works great. Those Sani-Con hoses are very difficult to find, so I don’t want to leave it out in the sun when it is not necessary. It is so easy to take out when needed, complete the dump and put it back away. Way easier than the big stinky slinkies since it is always hooked up at the source and caps cleanly.

Thanks to this forum and my 3 years of membership, I already have a spare Sanicon hose in the RV. Its neatly repacked in the box with foam layers to avoid any damage during the next few years. For an extension, I got a 15' 3/4 hose and the fitting to screw into either a 3" or 4" dump. Newbie here, still trying to figure out how to do the RV thing. Heading to Colorado in 2 weeks after my Proton treatment

[CyberShanks]

In an effort to help save our sanicon hose, I purchased/installed one of these over it:


https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1


Ya, ya, I know, Amazon....


Jim