2011 Sierra 300RL auto reset breaker

[Ljes]

The auto reset breaker on my 2011 Sierra 300RL hydraulic slide out pump keeps tripping while I slide the slide outs in or out. Maybe 5 times or so each way. Does anyone know the amp rating on the breaker? I removed the breaker although I can not read the numbers on the side, they are covered over with paint.

[lckeehne]

Originally Posted by Ljes

The auto reset breaker on my 2011 Sierra 300RL hydraulic slide out pump keeps tripping while I slide the slide outs in or out. Maybe 5 times or so each way. Does anyone know the amp rating on the breaker? I removed the breaker although I can not read the numbers on the side, they are covered over with paint.

Ljes,
Did you ever get an answer? I have the same year and model.
SIDENOTE:
By the way did you take a look at the hydraulic pump and look for the manual way to move the slides…. Mine has the frame 3/4” away and cannot be done without loosing the entire motor and rotate to allow access.

Let me know where the reset breaker located when moment.

[Ljes]

I ended up replacing the auto reset breaker with a new one and it fixed the problem. It was only $10 on Amazon and east to replace. Here is the exact listing from Amazon “Short Stop Circuit Breaker 12V 50A (50 amp) Plastic No Bracket KEPS Nuts”. It was located near the hydraulic pump for the slides and you will see the large gauge wire from the pump goes directly to it

[lckeehne]

Originally Posted by Ljes

I ended up replacing the auto reset breaker with a new one and it fixed the problem. It was only $10 on Amazon and east to replace. Here is the exact listing from Amazon “Short Stop Circuit Breaker 12V 50A (50 amp) Plastic No Bracket KEPS Nuts”. It was located near the hydraulic pump for the slides and you will see the large gauge wire from the pump goes directly to it

Lees,
Thanks for letting me know location.
Happy trails