Today I found the propane line serving the oven/range to be resting on one of the fresh water tank steel supports. This is the line that tees off from the main on the left side near the FW tank. There appeared to be some abrasion already starting on the hose. I ran a zip tie around it and the fresh water tank fill hose at the tank inlet. Hope this nipped a future problem in the bud.
__________________
2020 Flagstaff E-Pro E19FD
2006 Toyota Tundra
You might consider taking a piece of rubber or plastic tubing about 2.5" long with an ID the same as the OD on the gas line spit it down the middle and wrap around the gas line and zip tie in place just an idea
__________________
Retired Navy
Jake my sidekick (yellow Lab) 10/04 - 05/20
2017 RAM 2500 CC 4X4 Cummins Diesel
2016 Flagstaff 26 FKWS
AF&AM & El Korah Shrine of Idaho
You might consider taking a piece of rubber or plastic tubing about 2.5" long with an ID the same as the OD on the gas line spit it down the middle and wrap around the gas line and zip tie in place just an idea
Great idea SeaDog! Think I've got some old garden hose around.
__________________
2020 Flagstaff E-Pro E19FD
2006 Toyota Tundra
Linear Mode
