IRV speaker volume does not adjust adjust for Zone 3
Hi,
My IRV entertainment system speaker volume does not adjust adjust for Zone 3 which goes to the outside speakers. The stuck zone 3 volume is way too-high for outside, so I don't use it. The zone 1 & 2 adjust just fine...
Any ideas on where to begin troubleshooting ?
Thanks!
In one of mine, by pressing zone 3 and holding it for a couple seconds, it would switch it between a secondary input. You could have sound from one input playing on zones 1 and 2 but something different on zone 3. It also locked the volume on Zone 3.
__________________
2011 Rockwood Mini Lite 1809S 2013 Rockwood Ultra Lite 2304S
2004 Dodge Dakota SLT+ 4.7 2012 Ford F150 FX4 3.5 EcoBoost
In one of mine, by pressing zone 3 and holding it for a couple seconds, it would switch it between a secondary input. You could have sound from one input playing on zones 1 and 2 but something different on zone 3. It also locked the volume on Zone 3.
^^X2
My IRV66 works this way.
Holding the zone 3 button for a few seconds locks/unlocks the volume for that zone. This was not in my manual but I found this information a few years ago on another R/V forum where the member had the exact same issue the OP described and someone else chimed in. I then tested mine and it does indeed work.
__________________
2022 Cedar Creek 345IK 5th Wheel•Solar & Inverter•2024 Ford F-Series SCREW•7.3L•4x4•Factory Puck•B&W Companion•TST Tire Monitor w/Repeater•Sinemate 3500w Gen.
F&AM Lodge 358 Somerset, PA - JAFFA Shrine - Altoona, PA Days Camped ☼ '19=118 ☼ '20=116 ☼ '21=123 ☼ '22=134 ☼ '23=118☼ '24=101
IRV speaker volume does not adjust adjust for Zone 3
Linear Mode
