When did they start putting battery cutoff switches on the 2109s as a stock item
Rockwood has been installing factory battery disconnect switches for at least 10 years.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
The reason i ask this question is when i had my walkthrough on the tt they never showed this to me sooo i installed a switch on the battery box and just discovered it when i was removing the LP tank cover to install a window in the cover to see the valve for the tanks. now i feel dumb: sorry about it being upside down
Well, your new switch is better than the factory one and is sure to actually cut all power drains.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
The reason i ask this question is when i had my walkthrough on the tt they never showed this to me sooo i installed a switch on the battery box and just discovered it when i was removing the LP tank cover to install a window in the cover to see the valve for the tanks. now i feel dumb: sorry about it being upside down
That’s the same switch I’ve used on every TT I’ve owned. One of the first mods I do if there isn’t a cut off switch already installed.
)
Linear Mode
