Hitch height at top of ball

[rmilsap30]

Anyone that has a TT comparable to a 2707ws that can give me a accurate measurement while trailer is level and on flat ground, from ground to top of where the ball would be? Have a 2707ws on order and found a Hensley cheap but need to get a different stinger. Thanks

[donniedu]

If I remember correctly over three different trailers my measurement was 16 inches ground to top inside socket

[rmilsap30]

Thanks, glad I asked. Dealer I asked said 23 1/2 -24". Guess Im going to have to find a similar model on a lot somewhere and measure. To big of a swing here.

[youroo]

If you are trying to set up a Hensley with the correct Stinger,you Do need "Your units Height"! For "Ball Park Height" I use "19""! Youroo!! PS please come back and tell what Your Height is,which I guess at "6' 2"! Youroo!!

[beernut74]

I have a 2706ws. 22-1/4" to top of coupler with rv frame parallel to the ground.

[old40ford]

Originally Posted by youroo

If you are trying to set up a Hensley with the correct Stinger,you Do need "Your units Height"! For "Ball Park Height" I use "19""! Youroo!! PS please come back and tell what Your Height is,which I guess at "6' 2"! Youroo!!

X2

[D W]

Originally Posted by rmilsap30

Thanks, glad I asked. Dealer I asked said 23 1/2 -24". Guess Im going to have to find a similar model on a lot somewhere and measure. To big of a swing here.

I believe 23 1/2" is in the ballpark. 16" seems way too low.

[cmac7203]

Did we get the answer on this? I just bought a 2707ws and need to set my hitch height before I get to dealer 100 miles away.

[rmilsap30]

Ours sits right close to 23". Congrats on the 2707. We love ours.

[cmac7203]

Thanks! Our dealer is 2 hours away and I think I may have missed something. I think I remember seeing a combo black/gray water drain on the corner and MAYBE another drain 1/2 way up? I could be confusing it with another I looked at so many!

[cmac7203]

Disregard post. Moved to a separate thread.

[cmac7203]

Originally Posted by rmilsap30

Ours sits right close to 23". Congrats on the 2707. We love ours.

Do you have measurements from (1) ground to BOTTOM of coupler, (2) and the height of the frame itself back by the battery? I am ordering an Anderson Hitch ahead of time and those measurements will help me make sure I order the right one.

Thanks!

[rmilsap30]

Im sorry I just saw your question just now. I can get that for you in a sec if you still need it.

[cmac7203]

No worries. Andersen installed and works great.