|
|
03-12-2017, 10:23 PM
|
#1
|
Member
Join Date: Dec 2016
Location: Seattle WA
Posts: 39
|
Rockwood 2306 table issues
So as far as I can see it is impossible to stand this table and have it flush to the window because of the wheel well. Something has to be missing or I have the wrong table. Can anyone shed any light on this?
|
|
|
03-12-2017, 10:26 PM
|
#2
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
Mine is higher then window ledge.
Move the leg.....
|
|
|
03-12-2017, 10:28 PM
|
#3
|
Senior Member
Join Date: Aug 2015
Posts: 463
|
Unless there is a special table made for your TT and they put in the wrong one it looks like you may have to move one set of legs in a bit.
Typical limited thought engineering!
__________________
2020 Grand Design Reflection 240 RL
2006 F350 Lariat Crew Cab Super Duty 6.0 diesel 4X4
|
|
|
03-12-2017, 10:47 PM
|
#4
|
Site Team
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,845
|
Yep, looks like it's not the right table for that model.
Is the trailer used?
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
|
|
|
03-12-2017, 10:55 PM
|
#5
|
Member
Join Date: Feb 2017
Posts: 33
|
Did you try turning it around. I have the same table setup in my microlite. I thought the same thing, then my husband took the table turned it around and it fit. I think one set of legs is screwed in further so it fits over the wheel well.
|
|
|
03-12-2017, 10:56 PM
|
#6
|
Member
Join Date: Feb 2017
Posts: 33
|
Sorry, I just looked closer at the legs. They weren't screwed in the right place on one side.
|
|
|
03-12-2017, 11:00 PM
|
#7
|
Member
Join Date: Dec 2016
Location: Seattle WA
Posts: 39
|
It's a brand new 2017 Rockwood 2306, it has about 6 marks were something was screwed into it but is not there now. I,m thinking it has 2 equal height legs for when it gets used outside if the trailer, and then should have another method of support so it can be used flush up to the exterior wall/window. I just can't see the final design blocks the walkway.
|
|
|
03-12-2017, 11:09 PM
|
#8
|
Site Team
Join Date: Jan 2007
Location: Goodyear, Arizona
Posts: 33,845
|
I think the table is from another model that has the dinette in another location.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
|
|
|
03-13-2017, 05:56 AM
|
#9
|
Senior Member
Join Date: Aug 2016
Posts: 1,834
|
My '16 has one set of legs offset inward. Will try to get picture tonight (maybe).
|
|
|
03-13-2017, 06:17 AM
|
#10
|
Senior Member
Join Date: Jan 2012
Location: Upstate NY
Posts: 367
|
Did you get a thorough PDI? This is something the dealer should have already taken care of when you picked up the trailer. It looks like the right table top and legs...they just screwed the legs on the wrong place. Mine are both inward...not on the very edge like yours.
__________________
2013 Rockwood Mini-Lite 2306
2011 Ram 2500HD Hemi
|
|
|
03-13-2017, 06:44 AM
|
#11
|
Senior Member
Join Date: Dec 2014
Posts: 227
|
Quote:
Originally Posted by aeblank
My '16 has one set of legs offset inward. Will try to get picture tonight (maybe).
|
My '15 is the same way. You either have the wrong table, or someone installed the legs in the wrong place. One side should be offset inward to allow for the wheel well.
|
|
|
03-13-2017, 09:56 AM
|
#12
|
Senior Member
Join Date: Aug 2016
Posts: 1,834
|
Have screw gun..........Will fix.
|
|
|
03-13-2017, 12:26 PM
|
#13
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Wrong table. Tell your dealer. Doesn't look like you can properly move the legs. On my 2014 2306 we have a totally different table. It has legs that let the table swing/pivot down to the lower position. Probably changed this at some point but your table is not right at all.
__________________
There are 10 types of people in the world.
Those that know binary, and those that don't.
2013:31 / 2014:51 / 2015:58 / 2016:37 / 2017:46
2018:16
Total 239
|
|
|
03-13-2017, 12:26 PM
|
#14
|
Junior Member
Join Date: Feb 2015
Location: Texas Gulf Coast
Posts: 10
|
Wrong table?
It looks like the heavy stand-alone table that came with my 2109S model that has a jack-knife couch, not the dinette setup as in 2104.
__________________
________________________________________________
2016 2109S Rockwood Mini Lite - - 2014 Chevy Silverado Texas Edition
|
|
|
03-13-2017, 01:29 PM
|
#15
|
Senior Member
Join Date: Jun 2012
Posts: 10,907
|
Look at pics #25 and #26 in the link below. The outer legs by the window are clearly NOT at the end of the table, like the inside set is. You probably just need to turn the plate that the outside set is attached to by 180 degrees, but you'd need to measure the offset that you need to make sure. You MIGHT have to not only turn it around but move it more toward the center of the table.
#R201717209 - 2017 Forest River Rockwood Mini Lite 2306 for sale in Bridgeview IL - House of Camping
Unless my dealer were close by, I'd fix it myself.
UPDATE: I just had a second thought:
If you just spin the plate around, the legs will want to fold to the outside rather than the inside. So you probably really need to just move entire plate inward an appropriate distance. I'm not sure how well they will fold up with the other set of legs if you do this. Make sure you try folding them before you run any screws into it. But I would assume the "correct" ones fold OK.
__________________
1988 Coleman Sequoia - popup (1987-2009) - outlasted 3 Dodge Grand Caravans!
2012 Roo19 - hybrid (2012-2015)
2016 Mini Lite 2503S - tt (2015 - ???)
2011 Traverse LT, 3.6L, FWD
2009 Silverado 1500 Ext Cab, 5.3L, 4x4, 3.73
2016 Silverado 2500HD Dbl Cab, 6.0L 4x4, 4.10
|
|
|
03-13-2017, 04:23 PM
|
#16
|
Junior Member
Join Date: Jun 2011
Posts: 5
|
A bit off topic, but has anyone found a way to travel without folding the table down? I find that a nuisance.
|
|
|
03-13-2017, 04:31 PM
|
#17
|
Senior Member
Join Date: Aug 2016
Location: Surrey BC
Posts: 399
|
Quote:
Originally Posted by patricio
A bit off topic, but has anyone found a way to travel without folding the table down? I find that a nuisance.
|
Spending 42 seconds, at the most, to collapse and place the table is too much? I'm curious.
Do you plan on having things on the table while moving?
I'm baffled.
__________________
2011 Nissan Xterra V6
2016 Rockwood MiniLite 2306
Nights Camped 2016 [24]
Nights Camped 2017 [63]
Nights Camped 2018 [27]
|
|
|
03-13-2017, 04:32 PM
|
#18
|
Senior Member
Join Date: Jun 2013
Location: mid Michigam
Posts: 124
|
Looking at the pictures, I think I'd rather have a wall mount for internal use leaving one leg strapped up. Moving the leg in might make it unstable to use outside and may make folding the legs impossible because of overlap.
__________________
2013 Salem Hemisphere 286 RLT
2009 Silverado 2500HD
|
|
|
03-13-2017, 04:39 PM
|
#19
|
Senior Member
Join Date: Feb 2013
Location: Pfafftown NC
Posts: 2,353
|
Ah-ha. I see something that may resolve this. In the photo I see something in the middle of the window lower frame that I don't have in my 2306. It just might be a support for the table if you fold one set of legs up. That might be the solution. Fold up the outside let of legs and support the table on that thing below the window. That just maybe a part of the window since my windows are different and I don't know what that thing is. Just a thought.
__________________
There are 10 types of people in the world.
Those that know binary, and those that don't.
2013:31 / 2014:51 / 2015:58 / 2016:37 / 2017:46
2018:16
Total 239
|
|
|
03-13-2017, 04:39 PM
|
#20
|
Who Dares, Wins
Join Date: May 2012
Location: Chester County, PA
Posts: 7,063
|
Had the same setup on our 2306. One leg was offset (flipped around from your pic) it was still a bit off the wall.
As for leaving it up, did it one time by accident and it busted up the legs. We made it work then switched to the post style poles and never put it down again.
__________________
Pat, Jen, Heather & Sapphire, the head mouser.
2015 Chevy HD D-Max
2022 Impression 315MB
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|