Finally our new TH

[reeston]

After three months of waiting, our 2021 Cherokee 25RRTBL was finally delivered. We’re still on the road heading back to Austin from the dealer in Middlebury, IN.

BTW: How do I turn off the blue interior speaker lights?

[Bugg013]

Ours come on automatically when we turn on the interior lights.

Same with the exterior blues, when the exterior lights are on.

The only thing that has its own switch in our rig, is the blue lights on the stove.

[Wiscampsin]

Enjoy your 2021 Cherokee 25RRTBL!

[Sharonogoingsolo]

Originally Posted by reeston

After three months of waiting, our 2021 Cherokee 25RRTBL was finally delivered. We’re still on the road heading back to Austin from the dealer in Middlebury, IN.

BTW: How do I turn off the blue interior speaker lights?

You can go to the Forest River Owners Group https://forestriverfrog.com and see if you can find the information in the on line Owner's Manual for your model.

[reeston]

Didn’t have strong internet access or cell service where we were so couldn’t access any info.

[Daddyray]

Welcome I also have a 25RRttbl and we love it. May I ask what you have for a toy? I have a Can Am Spyder and it can be fun loading it. Enjoy your new trailer.

[reeston]

Originally Posted by Daddyray

Welcome I also have a 25RRttbl and we love it. May I ask what you have for a toy? I have a Can Am Spyder and it can be fun loading it. Enjoy your new trailer.

Will be two adventure style bikes, Triumph Tiger 1200 and Kawasaki Versys 650. Used a “Bolt-it-on” bar for our old TH and hope it works out for us for our new one.
Thanks

[Daddyray]

I'm posting my pic of the bar I made so in case you have to figure out how to strap the bikes down this may give you an idea for more tie down points possibly.

[reeston]

Nice setup with the bar.

[Daddyray]

Thank you it comes in handy for my bike and you could make a couple of them at different lengths if needed. If I can help with what I know of this trailer I will help if you need a question answered.

[reeston]

I had purchased the “Bolt It On” bar for my previous TH but never had a chance to use it much.
https://www.boltiton.com/
Plan on strapping the heavier bike over the axles with the other bike closer to the dinette area.

[Daddyray]

Very nice I hope the D-rings are spaced to where you can use it. I never heard of it I don't believe.

[reeston]

Very customizable bar. You can locate the “J” hook anchors wherever you want. I really like your solution.

[Daddyray]

With my bike I don't know if my fenders would fit into the tire receivers you have. I use a figure 8 nylon strap through the rim and a strap with a locking oval rings then the straps to the bar.

[agpopp]

Nice rig! I like the style of these new units.
Does that model have a solid rear roll up wall instead of just a screen like I have on my Wildwood 260?
If so, is it held in with magnets or permanently attached to the frame of the ramp door? I'm thinking I could get one of these from the factory.

[Daddyray]

It has a 2 piece vinyl that has a screen window with cover that rolls up. The 2 pieces can either roll up separately or if zippered together can be rolled up as one unit. They are mounted at the top and velcro on the sides of the door. I hope that helps as I am not at the trailer to see if I happened to be off little on my description.

[reeston]

Just as Daddyray described.
Pics keep coming out sideways

[Captjwteal]

Slide Light on ur control panel turns them off.

[reeston]

Originally Posted by Captjwteal

Slide Light on ur control panel turns them off.

Was able to turn the interior speaker lights on and off with the “OneControl” phone app.