Post up your Jeep Toad

[CZNEDY]

Originally Posted by Kenny kustom

Come on.... we all know Jeep’s are never “ finished”...

That's right Kenny

[Wolverine 1945]

Originally Posted by BamaBob

Hmmm Missed this thread


Here's ours:

FINE looking HM BamaBob !!!

[santarich]

Just finished towing my Jeep Wrangler 2 door 3000 miles in 8 weeks - 15 states!

[jahazlett]

Moving from NH to WA. Will be ten states in 11 days. Got a little muddy in SD. Flat towing 2017 JKU Sahara "Winter" edition, behind 2017 Sunseeker 3170DS F.

[Carmel]

That's us, 2010 wrangler and 2008 Georgetown.

[Kenny kustom]

So, let’s talk bumpers!
I see many of the jk toads with aftermarket bumpers, but still use a base plate..
Why not use a d ring adapter and pull from your recovery points?

[Sunset beast]

Originally Posted by Kenny kustom

So, let’s talk bumpers!
I see many of the jk toads with aftermarket bumpers, but still use a base plate..
Why not use a d ring adapter and pull from your recovery points?

That's what I use towing my 2010 JK, but with the lift I needed to use a riser hitch to keep the proper angle. I don't have any pictures of what it looks like all connected, here's front picture of the bumper. I'll be heading South in 2 weeks with Jeep in Toad I'll post some pictures if anyone is interested what it looks like all hitched up.

[Wolverine 1945]

Originally Posted by Carmel

Attachment 150713
That's us, 2010 wrangler and 2008 Georgetown.

What is the length of that GT ???
Looks like about a half of a mile ???

[CZNEDY]

Here is our bumper set up

[Kenny kustom]

Originally Posted by CZNEDY

Here is our bumper set upAttachment 150753

So, why use a base plate when you could pull from the recovery points?

( just curious) not faulting you.

[CZNEDY]

I don't have a base plate. The two brackets for the tow bar are bolted to the bumper. It came that way from rock hard 4x4

[Kenny kustom]

Originally Posted by CZNEDY

I don't have a base plate. The two brackets for the tow bar are bolted to the bumper. It came that way from rock hard 4x4

Got it. Had to zoom in on your pic!

[CZNEDY]

[emoji106]

[Kenny kustom]

You’re good with those 4 stainless bolts holding the entire weight of the Jeep?

[Iwannacamp]

Originally Posted by CZNEDY

Here is our bumper set upAttachment 150753

Better hope the tow set-up don't come off....cause them shackles ain't gonna make it.

[CZNEDY]

So far, I've towed it over 3,000 miles and the bolts are still tight. They have options for the brackets for each type of tow bar manufacturer. The bumper and the brackets are 1/4" thick. I wondered that before I bought it, but the set up is pretty solid and it has the same number of bolts as a base plate connection. The bumper bolts onto the factory bumper holes.

[sgtlm17]

Originally Posted by CZNEDY

So far, I've towed it over 3,000 miles and the bolts are still tight. They have options for the brackets for each type of tow bar manufacturer. The bumper and the brackets are 1/4" thick. I wondered that before I bought it, but the set up is pretty solid and it has the same number of bolts as a base plate connection. The bumper bolts onto the factory bumper holes.

What brand bumper is that

[AquaMan]

Originally Posted by Iwannacamp

Better hope the tow set-up don't come off....cause them shackles ain't gonna make it.

Those brackets and D-rings will far outlast the towbar, cables, and most likely the hitch. You could hang that Jeep from just one of those D-rings and it wouldn't think twice about it.

[Kenny kustom]

Originally Posted by AquaMan

Those brackets and D-rings will far outlast the towbar, cables, and most likely the hitch. You could hang that Jeep from just one of those D-rings and it wouldn't think twice about it.

Right on.
I would trust the d ring mounts over anything else.

I would think the hook would open up first.

[CZNEDY]

We even used them to anchor one end of the all star zip line