I wonder how that bow would have worked if it were turned 180 degrees so that the middle bend part would have been toward the inside of the bunk???
That clearly is not right... and the little that you paid for a new one was clearly the right answer.
__________________ "nothing can now be believed which is seen in a newspaper. Truth itself becomes suspicious by being put into that polluted vehicle." Thomas Jefferson to John Norvell pg. 2, June 11, 1807 2014 Shamrock 183
2014 RAM 1500 Bighorn Crew Cab, HEMI, 3.21 gears, 8 Spd, 4X4 TST TPMS
Yep, I've never seen any Roo/Shamrock hybrid with a bent C-hoop like that.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
If you look at the photos (not very good) the bunk bows was manufactured like this. It is the wrong bow. The new one fits perfectly. I check the bow on the rear bed and it looks like the new one. I have no idea how the wrong bow was installed.
You may want to restate your question and give more detail or attach a picture about what you are asking...
I guess you are asking how to attach the vinyl tent to the lower outer corners?
Most owners never have to do this. Sometimes a gap opens and you may use some silicon adhesive caulk to fill the gap as you pull the lower corners back into place.
If this answer does not answer your question, then I go back to the first sentence.
The easiest way to attach a picture is to use the paper clip icon and upload a picture.
__________________ "nothing can now be believed which is seen in a newspaper. Truth itself becomes suspicious by being put into that polluted vehicle." Thomas Jefferson to John Norvell pg. 2, June 11, 1807 2014 Shamrock 183
2014 RAM 1500 Bighorn Crew Cab, HEMI, 3.21 gears, 8 Spd, 4X4 TST TPMS
Well I fixed the problem of the sagging canvas on the front Bunk. I ordered a replacement bunk bow. When I received it it was apparent it was shaped differently than the one installed on our bunk. It appears that the wrong bunk bow was installed during the manufacturing process. Once I installed the new bunk bow problem solved. I then had to move the bracket to its original position.
I bought a 2012 21SS Shamrock this winter and found that the front bunk has the same problem. Would you mind sharing where you ordered the part from?
Hi there! This is happening to my rig now. I was just out last week and I now have two huge gaps in the corner of one of my tent beds. What did you do to fix?
Linear Mode
