Geo Pro 17PR Rear Bed Locks (2019)

[Silverado1500]

Anyone with the same unit?
This model has a rear tip out bunk. When not in use and placed in the travel mode there is a latch on each side which latches to a bolt. My question is does anyone now how to adjust the lock rods so they get a better grip on the locking bolt.

Tks.

[bikendan]

Originally Posted by Silverado1500

Anyone with the same unit?
This model has a rear tip out bunk. When not in use and placed in the travel mode there is a latch on each side which latches to a bolt. My question is does anyone now how to adjust the lock rods so they get a better grip on the locking bolt.

Tks.

Your 17PR is a Hybrid, the only hybrid model in the GeoPro/EPro line.
I'm assuming that the latch system is the same as the ones used in the Rockwood Roo/Flagstaff Shamrock hybrid line.
Moving this post to the Roo/Shamrock sub-forum so you can get help from other hybrid owners who are familiar with the latch system.
There are a number of threads there with instructions for the Roto-Vise latch system.

[Underthedog]

this might be what you are looking for. it is somewhere on this site also but I'm not finding it.


http://kencon.us/wp-content/uploads/...Adjustment.jpg


Be sure not to adjust too tight. Ours do not appear to really grab but havn't failed in some 25K miles or so.
I added vinyl J channel above/against the top of the bunks as added insurance to keep water out. Make sure the side/top seals don't have a gap.