Sink cover / cutting board storage

[BigDogD]

To store our sink cover when parked and not needed I came up with this. I installed a 3M command hook on the wall @ a height that allows the hook to go thru the hole - yet hold the board from falling over. Note: the hook is not holding the weight of the board - only keeping it in place against the wall. While I have never had a command hook fail, the board clearly weighs more than the 1 lb. limit of the hook. I would not leave the board in this position while towing for the same reason.

[MrT]

Nice solution. We don't use ours much, so when we are camped, it just lives in the small gap between the slide wall and the couch. During travel, it rides on the couch with half or so trapped by one of the backrest cushions.

[drs244]

Good idea

[miatared]

I also put a hook on the back of the dinette seat - but to hold a smaller version.

The 19ft has no counter space to speak of.

I ended up cutting mine in half, to cover half of the sink - and we now use it all the time.

We needed a bit of space but also the sink to wash stuff.

The other half stays in the garage.

[drs244]

Originally Posted by miatared

The 19ft has no counter space to speak of.

I feel your pain, the 233s has no counter space as well. Might just try you suggestion and cut mine in half.

[hockeytownmom]

What are you guys using to cut them? ... yes, I'm a girl and scared of big power tools. lol

[miatared]

Just a small circular saw.

Ask a friend who has one to cut it if you do not have one.