7/16 - Socket for electric tongue jack on TT?

[offroad]

I have drill sockets to run my stabilizers and slides with a cordless drill.

Can't seem to find one in 7/16" to run my power tongue jack in case of its motor failing.

Would need to have a fairly long shank. I do have a crank handle but would rather use a cordless drill for backup.

[4mula1fan]

I got a cheapo set of 1/4" sockets and a cheapo extension and cut the ratchet end off so it would chuck up in my cordless drill. I also got a 1/4 to 3/8 adapter so I could use bigger sized sockets in 3/8" drive.

[offroad]

Originally Posted by 4mula1fan

I got a cheapo set of 1/4" sockets and a cheapo extension and cut the ratchet end off so it would chuck up in my cordless drill.

Good idea but, I'm surprised Camco doesn't make this. I already bought their 3/4" socket for stabilizer jacks.
You'd think a 7/16" version for tongue jacks would sell as well.

[mark0224]

Harbor freight you can find just about any socket you want and the extension to hook to your drill inexpensive