What did you do to your camper today?

[BriaBeck]

Installed the replacement fridge in the outdoor kitchen.


Don't drill holes in the sides of these little fridges... there's stuff in there. Ask me how I know.

[Iwannacamp]

Originally Posted by BriaBeck

Installed the replacement fridge in the outdoor kitchen.


Don't drill holes in the sides of these little fridges... there's stuff in there. Ask me how I know.

It is called the condenser coil. Pretty common on small refer units.

[BriaBeck]

Originally Posted by Iwannacamp

It is called the condenser coil. Pretty common on small refer units.

LOL, yeah, I know, now.



Last one of these little guys I dealt with still had probably R-12 or R-22 in it and still had the condenser on the outside in the back, instead of in the sides like they apparently are now. Left it with my college buddies when I graduated.


Times, designs, and manufacturing methods change.

[Boomerweps]

Gee, all I did was buy a small stick on mirror from Aldis and put that and the over the cabinet door paper towel holder from Amazon in it. I did dump the small electronic dehumidifier, about 10-12 ounces after most of a week.

[BriaBeck]

Got all of my running lights and tail/brake lights converted over to LED.


0.45 Amps total draw on the running lights after converting to all LEDs.


They look to be about the same brightness as the 194 bulbs that they replaced. I think the tail/brake lights might be a bit brighter, they had 1157s in them before.


Yesterday I also got my wheels taken in to be refurbished and powder coated. I don't know how they will turn out, but they can't possibly look as bad as they did!

[myxkp]

Originally Posted by 5picker

Today... aired up the Goodyear Endurance tires, changed the batteries and O-rings in my TST TPMS sensors in advance of our first trip of the season Friday.

Dewinterized this past Saturday. We had a short blast of snow yesterday but temps were right around 33° so no problem and it is gone today.

Enjoy; maybe some pics?
Trying to finish a kitchen remodel and then out to Nashville to see the grandchildren - then some camping on the coast.

[frank4711]

After first trip last weekend I took out stuff I did not need to bring and redid storage areas to make space. Ordered new shower head and adapter to use RV LP quick disconnect for the Blackstone grill.

[Pinn]

Recaulked the kitchen and bathroom sinks.
Started packing for our trip this weekend to Chattahoochee Bend campgrounds in GA. While we are there we are going to the GA Ren Faire.

[emm-dee]

Finished entering item info into my motor home/camping database. Now, when I am trying to find the little bag of tractor pins, or whatever, I open the database on the iPad or iPhone and it tells me it’s in storage bin #5, located in storage compartment number three. I keep the master database on my home server so everything stays synced across the devices if I add, change or delete records.

[timfromma]

Today, I looked at the mess inside the camper, sighed then left.

[dcheatwood]

Installed Hellwig Anti-sway Bar. Took about 4 hours alone. Tight workspace and weight of bar were what cause it to not be a 30 minutes job.

[5picker]

Originally Posted by timfromma

Today, I looked at the mess inside the camper, sighed then left.

Are you back home already?

[jgroff]

Pulled it forward, took the cover off and loaded it up for the first outing. Also installed a storage box and digital thermostat.

[timfromma]

Originally Posted by 5picker

Are you back home already?

Nope, still at the Fort. Head home Saturday morning.

[AbdRahim]

Originally Posted by Crowell392

What make and model I would like to do this mod

I threw away the box, but the Dometic 310 I think has the standard 5 1/2 in space between the screws. I got it at Lowes or Home Depot (Kohler). Again don't remember which, but I did get a plastic, slow closing model. They have both wood and plastic models. There is a module of some sort behind the toilet. This will be exposed with the new seat. I am attempting to fashion a cover for it. I will take pictures when it is done. Trying to determine the cleanest way to attach the cover to the back of the seat.

[howellma]

Wife decided to recover the couch and the arm rests by the dinette, this is as far as she got today before we head off tomorrow. The "leather" was flaking off. But when I pulled the couch out we found that the slide floor had seperated from the wall and had sagged about 2". There was a screw about every 2 feet. I jacked the floor up until it was in place and drilled and inserted screws about every 6 inches in the sole plate, looked to be 1" square tube. Then went inside and put a 1 x6 against the wall vertically and screws there to to give some added support. I forgot to take pictures of it before I started.

[Boomerweps]

Ordered another 10' potable water hose. Could use the 4' when connecting the filter but the 4' cost 30% more than the 10', plus the 10' has more uses.
Measured and ordered in the proper flying insect screen for the water heater. The one I ordered in during winter is too small and past the return date ;(
Removed and painting white the pee yellow screen holder on my Camco vent cover. Turned a deep yellow from white over last summer. May end up removing the whole cover and painting it depending on how the screen holder compares.
May install magnetic catches today on the underbed storage exterior door and bunk storage door.

[Boomerweps]

Pics. I just started to pick up tools and it started pouring.

[mckormicnavistar]

Put in towel racks and various paper holders and signage on the back that says Just a few flakes short of a full bale

[TBKHomeworld]

At the coast having a great time with the family.