|
|
02-27-2016, 10:20 AM
|
#6421
|
Senior Member
Join Date: Sep 2015
Location: Tennessee
Posts: 260
|
We are going to put everything back in 5er today. Line drawers, cabinets, etc. Lots to do this weekend.
2011 Ford F350 fx4 6.7 SRW
2016 Sandpiper 360PDEK
|
|
|
02-27-2016, 12:28 PM
|
#6422
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
Quote:
Originally Posted by kcconurse
Thanks everyone! I apologize I am new to the forum and didn't realize I answered on a fifth wheel topic. I just bought a little popup. 2016 Rockwood 2516g. Hope to have a nice fifth wheel someday though.
|
Everyone is welcome here! Lots of us have fifth wheels, but there are also travel trailers, hybrids, and pop-ups.
Welcome and congrats!
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
|
|
|
02-27-2016, 12:28 PM
|
#6423
|
Always Learning
Join Date: Nov 2011
Location: Four Corners, FL
Posts: 21,891
|
For me, nothing- filled my Berkey water filter, locked it up, and am going to play at Magic Kingdom all day!
__________________
Officially a SOB with a 2022 Jayco Precept 36C
Checkout my site for RVing tips, tricks, and info | Was a Fulltime Family for 5 years, now we're part-timing on long trips
|
|
|
02-27-2016, 01:29 PM
|
#6424
|
Junior Member
Join Date: Feb 2016
Posts: 3
|
Quote:
Originally Posted by ependydad
Everyone is welcome here! Lots of us have fifth wheels, but there are also travel trailers, hybrids, and pop-ups.
Welcome and congrats!
|
Thank you, I appreciate that!
|
|
|
02-27-2016, 02:23 PM
|
#6425
|
Left Coast
Join Date: Dec 2014
Location: vancouver,washington
Posts: 15,649
|
A lot of the same things are still the same, Just the box they're in is different....
|
|
|
02-27-2016, 05:01 PM
|
#6426
|
Senior Member
Join Date: Feb 2016
Location: W-S NC
Posts: 441
|
Installed the Progressive 50A EMS. Kept all the smoke inside!
Still need to determine where I want the remote readout, but I'm in no hurry.
2016 Sandpiper 376BHOK
2500HD Chevrolet
Sent from my iPhone using Forest River Forums
|
|
|
02-27-2016, 08:59 PM
|
#6427
|
Senior Member
Join Date: Jan 2011
Location: Part Timing It Now
Posts: 3,457
|
Quote:
Originally Posted by head gamez
Installed the Progressive 50A EMS. Kept all the smoke inside!
Still need to determine where I want the remote readout, but I'm in no hurry.
2016 Sandpiper 376BHOK
2500HD Chevrolet
Sent from my iPhone using Forest River Forums
|
__________________
"PT Crew Members Since 9/2010"
2011 RAM 2500 HD 6.7L CTD Crew
2014 Prime Time Sanibel 3250
|
|
|
02-28-2016, 07:54 AM
|
#6428
|
Phat Phrog Stunt Team
Join Date: Apr 2012
Location: Tipp City, OH
Posts: 7,154
|
Working on bedroom tv cabinet, pics to follow. Did get this little number installed on my dash though.
Sent from my iPhone using Forest River Forums
__________________
2016 Georgetown 364TS
2017 Jeep Rubicon Recon toad
Nights Camped 2019 - 17
|
|
|
02-28-2016, 09:34 AM
|
#6429
|
Senior Member
Join Date: Aug 2014
Posts: 496
|
I greased the axles today with Lucas synthetic. The factory grease looked like black mud. The Lucas grease is Greene so it is easy to see when the old stuff if flushed out. I go on the next trip in 2 weeks so once back from that I will put a few more oz in each axle to make sure we officially got 100 coverage.
__________________
Doc
____________________________________
2014 V-Cross Platinum 365VTSB (Bought Labor Day 2014)
TV: 2016 GMC 3500 Denali - Motor Ops Tuned
Days Camped 2016: 28
Days Camped 2017: 25 so far
|
|
|
02-28-2016, 09:55 AM
|
#6430
|
Senior Member
Join Date: Jun 2011
Location: Hattiesburg, MS
Posts: 1,658
|
Quote:
Originally Posted by bob caldwell
A lot of the same things are still the same, Just the box they're in is different....
|
!!!
Nobody else noticed that I guess.
__________________
2012 Flagstaff V Lite 30 WRLTS
2005 Dodge Ram 2500 5.7 Mag Hemi 3.72 Rearaxle
Nights camped 2015 = 23
Nights camped 2016 = 25
Nights camped 2017 = 13
Nights camped 2018 = 3
|
|
|
02-28-2016, 02:01 PM
|
#6431
|
Junior Member
Join Date: May 2015
Location: Chelsea, AL
Posts: 17
|
Installed new Dometic 320 toilet to take the place of the original 300 series. Feels more like home now.
2015 Wildwood Heritage Glen 272 RLIS
2014 Ford FX4 Crew EB
|
|
|
03-01-2016, 04:01 AM
|
#6432
|
Senior Member
Join Date: Aug 2014
Location: Central Indiana
Posts: 360
|
Preparing for our first trip of the year - a long one from Indy to Disney. On the to do list:
1. Seal a problem area on the front cap. It looks like I took a hit from some road debris on our last trip home in the fall. Small dent near the trim, creating a slight gap btwn the fiberglass and trim. Should be easy to fill and seal up. BTW, stored inside, so no damage from waiting to repair:beer:
2. Check one tire on curb side. I don't think I've run it on low air pressure, but the sidewalls have that look to them. Will probably replace just to be safe, or at least swap that one out w the spare.
3. Install oxygenics shower head I bought last fall.
Brian
__________________
Brian, Stacy, and the kids
2011 F-250 CCSB 6.7L PSD 4WD
2013 Palomino Solaire 269BHDSK
ProPride Hitch
|
|
|
03-01-2016, 12:31 PM
|
#6433
|
Senior Member
Join Date: Aug 2015
Posts: 463
|
Quote:
Originally Posted by leefl
Hmmm, I suspect my 2015 8281WS is probably the same then, since so similar to your 8280WS.
I'm not clear exactly where you're talking about, but I guess this is where the vent pipe goes up through the roof, and you're referring to the in-roof ducting ?
Did either of you do sealing from inside the roof-space, using foam-filler etc ?
Any clarification would be greatly appreciated, since I'm wanting to improve the A/C effectiveness any way I can for our summer road-trip.
Thanks in advance
|
You are correct about the vent pipe rising up and actually through the in ceiling duct cut outs.
When I removed the vent pipe covers I noticed the problem. Before installing the new covers I used expansion foam to seal around the pipe at the bottom of the duct where it comes through and after it set sealed around the top just underneath the vent cover too. After it cured I trimmed away the excess, added Dicor and installed the vent covers.
I hope this clarifies the work I did?
|
|
|
03-01-2016, 03:27 PM
|
#6434
|
Senior Member
Join Date: Feb 2016
Posts: 354
|
This weekend: New camper prep! Six cans of undercoating and three cans of paint for the underside. Added a battery master switch and a second battery. Made a partition for the under bed storage. Glue and screw a bunch of loose trim or panels. Man I'm beat......
|
|
|
03-01-2016, 06:16 PM
|
#6435
|
Senior Member
Join Date: Jan 2014
Posts: 691
|
Started packing the stuff out of it.Trading in on a new one later this week or first of next. Got all the things out of front bay under the nose and basement empty. Genny and tool box off the rack in the back.Sure have a lot of things I haven;t used yet. May leave out so I'll need them the next trip.
__________________
2011 Ram Mega Cab 3500 Larimie dually
2016 Chaparral 370FL
|
|
|
03-01-2016, 08:09 PM
|
#6436
|
Senior Member
Join Date: Aug 2014
Posts: 95
|
I waxed and took all the oxidation off my fiberglass. I also built a dump station holder.
|
|
|
03-01-2016, 08:18 PM
|
#6437
|
Senior Member
Join Date: Feb 2016
Posts: 265
|
Cut a 12' 2x10 down for ramps. One 5-footer based on my tire placement, and one 7'.
No, wait, my truck bed is only 6'. And the TT's rear rack is 70".
So one 5' and one 70"
Then I stapled some poly rope up inside the front storage to hold fishing poles. (pix in other thread).
We're taking her out for the first time Thur and Fri nights!! Site was already booked for Sat.
__________________
Family of six, camping in a Grey Wolf 26DBH LTD pushing a 2010 Armada via 10k/1k HaulMaster WDH stopped by a Prodigy P2 brake controller
Tug: 2010 2wd Nissan Armada Titanium with tow package.
Specs: Max Trailer Weight 9,100, Tongue Load: 910, GCWR: 15,100, GVWR: 7,150, Payload: 1,592
|
|
|
03-02-2016, 01:51 PM
|
#6438
|
Senior Member
Join Date: Aug 2015
Posts: 463
|
Tackled the vinyl problem listed in this thread.
LINK
Used latex paint I got Lowes to color match the original vinyl coating.
Hand peeled the loose vinyl. Some came right off, some took a little work and some couldn't be removed without causing severe wood damage.
Exposed all the wood to be painted.
Taped off everything I didn't want paint on and painted the first coat. Four hours later I sanded it. Used wood filler to fill where the vinyl pulled off too much wood. Repeated the paint/sanding one more time. Let sit overnight and painted final coat.
Doing the same to the entertainment center next.
|
|
|
03-02-2016, 01:58 PM
|
#6439
|
Senior Member
Join Date: Nov 2012
Location: Mount Laurel, New Jersey
Posts: 9,230
|
Looks good!
Sent from my DROID4 using Tapatalk
__________________
2012 SunSeeker 3100SS Toad-1962 Futura Average 100 + days camping
|
|
|
03-02-2016, 02:05 PM
|
#6440
|
Site Team
Join Date: Mar 2014
Location: Grayson County, Texas
Posts: 21,587
|
I DE-winterized mine!
__________________
2015 FR Wildcat 295RSX / GMC Sierra
Nights Camped: '13 = 49/'14 = 74/'15 = 74/'16 = 85/'17 = 110/'18 = 111/'19 = 86/'20 =108/'21 = 115/'22 = 135/'23 = 78; Booked for 2024 = 69
|
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Discussions |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|