Got a lot done today to the trailer.
I lubed both slides
Conditioned the seals on both slides
Conditioned all the window/door seals
Swapped the taillights with LEDs. I did not like how little you could see them during the day with the running lights on. This is much better. Different bulbs did nothing and LED bulbs in the existing fixture only made it worse.
When swapping the taillights I also had to remount and add lights for the license plate.
Wired up additional backup lights.
Sealed up the old taillight holes with silicone.
Wired the TPMS repeater to the battery shutoff finally instead of direct to the battery. One less thing to remeber when storing it.
Removed many stickers that needed to go.
Treated/cleaned all 4 tires and inspected them closely.
Bleached the awning to remove the mildew using the two beer method.
Replaced the self tapping screws on the front steps that were falling out with bolts that wont.
I am now trying to figure out the best way to attach the LED light strips under the trailer as that is my next project but it got too hot in the sun and had to take a break.
Attachment 178639Attachment 178644