12V Fan

[lwbfl]

Purchased a 12V fan at a local thrift shop to use in the Apex while. I wanted to move it around as needed and not fasten it permanently. Since we've always had antique campers, I wanted something rustic looking but also wanted to tie it in with the modern TT. Cut an old pallet board, hit the edges with a router and added a image of the Apex! Inside colors are grey so I gave it a light stain in that shade! Functions as needed!

[Reverse_snowbird]

I like the image of the Apex. How did you do that?
A moveable fan inside the rv is a good idea. An inside fan tends to cut down on hot and cold spots in the rig by 'mixing' the air.
Very creative.

[lwbfl]

Originally Posted by Reverse_snowbird

I like the image of the Apex. How did you do that?
A moveable fan inside the rv is a good idea. An inside fan tends to cut down on hot and cold spots in the rig by 'mixing' the air.
Very creative.

I printed the photo in reverse on my laser jet printer. The image can then be transferred by using a heat source such as an iron. We camped on the first trip without shore power and only had one 12V fan so when I happened across this one I grabbed it!