Source For Interior Wall Paneling?

[24v]

I want to use some interior wall paneling to hide wires. Does anyone know a good source where I might be able to find a pattern that matches what came in my trailer?

[koller1509]

Dealer?? You can find it online but the crating fees to have it shipped are usually more than the cost of the paneling.

[ES_FR]

Originally Posted by 24v

I want to use some interior wall paneling to hide wires. Does anyone know a good source where I might be able to find a pattern that matches what came in my trailer?

Source For Interior Wall Paneling?,

We would be happy to assist you with your question regarding interior paneling for your Mini Lite. Please contact Rayna Dimitroff in our Customer service department through the following personalized and direct link: Forest River RV Direct Service Contact - Forest River, Inc..

This direct link is provided for your convenience in order that we may resolve your concerns as quickly as possible. We will strive to respond to you within 24 hours of receiving your correspondence.

Respectfully,
Forest River

[24v]

Originally Posted by ES_FR

Source For Interior Wall Paneling?,

We would be happy to assist you with your question regarding interior paneling for your Mini Lite. Please contact Rayna Dimitroff in our Customer service department through the following personalized and direct link: Forest River RV Direct Service Contact - Forest River, Inc..

This direct link is provided for your convenience in order that we may resolve your concerns as quickly as possible. We will strive to respond to you within 24 hours of receiving your correspondence.

Respectfully,
Forest River

Wow, automated spam, how nice.

[itat]

Originally Posted by 24v

Wow, automated spam, how nice.

FYI, Forest River has nothing to do with the ownership of this forum but some employees to hang around once in a while.

That response does seem a bit canned but the information is valid.

[24v]

Originally Posted by itat

FYI, Forest River has nothing to do with the ownership of this forum but some employees to hang around once in a while.

That response does seem a bit canned but the information is valid.

Pretty sure a human didn't write that one.

[SailorSam20500]

Originally Posted by 24v

Pretty sure a human didn't write that one.

I'll bet a human wrote it. It was then reviewed and modified by 43 committees, 59 executives, and routed thru the loop 14 time before this final version was approved for dissemination. Now they just repost the same message.

Not picking on FR, I'm happy with the support they have provided. It just seems like that is how most corporations operate.

I did click on the link, interesting that the provided form was partially filled in with the OP's request, just needed name, address, etc. info added before submitting.

[24v]

Originally Posted by SailorSam20500

I'll bet a human wrote it. It was then reviewed and modified by 43 committees, 59 executives, and routed thru the loop 14 time before this final version was approved for dissemination. Now they just repost the same message.

So true.

[NMWildcat]

Wow, I would just be appreciative of the direct response, no matter how it was worded.

I would check it out before I deemed it canned spam. Geesh.....

[24v]

Originally Posted by NMWildcat

Wow, I would just be appreciative of the direct response, no matter how it was worded.

I would check it out before I deemed it canned spam. Geesh.....

You do realized the bot addressed me as "Source For Interior Wall Paneling?" as if it was my name right? Geesh.

Also, I followed the link to the email response form. If FR really wanted to be helpful they could just post a source for the wall paneling. Instead they want me to email them a bunch of info to a generic support email. No thanks. If I wanted FR's help I would contact them. I am posting on a forum looking for help from other enthusiasts, not asking for manufacturer support.

[NMWildcat]

Originally Posted by 24v

You do realized the bot addressed me as "Source For Interior Wall Paneling?" as if it was my name right? Geesh.

Also, I followed the link to the email response form. If FR really wanted to be helpful they could just post a source for the wall paneling. Instead they want me to email them a bunch of info to a generic support email. No thanks. If I wanted FR's help I would contact them. I am posting on a forum looking for help from other enthusiasts, not asking for manufacturer support.

Good luck with that.....

[itat]

Well, if you end up having to contact them, you'd better approach them with a different attitude. There are very few FR employees monitoring threads here. The fact that you actually got a response at all from someone from the Rockwood factory here is a positive thing. They would be the only one to be able to tell you exactly where the factory gets the panelling material. Everyone else will just be an approximate match.

Good luck.

[cavie]

You'll have to put your "Interior Decorater hat" on and purchase a contrasting pattern or color at the nearest big box store.

[24v]

Originally Posted by itat

Well, if you end up having to contact them, you'd better approach them with a different attitude. There are very few FR employees monitoring threads here. The fact that you actually got a response at all from someone from the Rockwood factory here is a positive thing. They would be the only one to be able to tell you exactly where the factory gets the panelling material. Everyone else will just be an approximate match.

Good luck.

Thanks for the lesson in dealing with people. If you don't know where to get what I was asking about, why bother replying? I appreciate your helpful response though, have a great day.

[24v]

Originally Posted by NMWildcat

Good luck with that.....

Thank you for your input, it is much appreciated!

[24v]

Originally Posted by cavie

You'll have to put your "Interior Decorater hat" on and purchase a contrasting pattern or color at the nearest big box store.

Yeah, this is exactly what I did today. I bought a some darker colored molding. Hides the wires fine. Doesn't look perfect, but good enough for me.

[Alabama Potter]

Not sure how many wires you have but we found some paintable wire/cable channel covers to hide the seemingly thousands of cables coming and going from television to satellite box at Best Buy. They’re 3” wide with adhesive to stick to the wall and “L” connectors to get around corners. Made by Legrand

[24v]

Originally Posted by Alabama Potter

Not sure how many wires you have but we found some paintable wire/cable channel covers to hide the seemingly thousands of cables coming and going from television to satellite box at Best Buy. They’re 3” wide with adhesive to stick to the wall and “L” connectors to get around corners. Made by Legrand

This one?
https://www.bestbuy.com/site/legrand...?skuId=5094201

[Alabama Potter]

Yes, that one. We did have to order some additional connectors from Legrand because we needed 2 "L"s but not real expensive - shipping was more LOL!

We painted it and it looks great. DH is SOOOOO happy not to have all those cables dangling and contained. He may have upgraded the adhesive and used Gorilla glue once he had everything in place.

Good luck!

[24v]

Originally Posted by Alabama Potter

Yes, that one. We did have to order some additional connectors from Legrand because we needed 2 "L"s but not real expensive - shipping was more LOL!

We painted it and it looks great. DH is SOOOOO happy not to have all those cables dangling and contained. He may have upgraded the adhesive and used Gorilla glue once he had everything in place.

Good luck!

I like that idea, thank you for the info.