I see several discussions on stuck or broke slides here. I know that is probably one if my biggest fears while camping.
Does anyone have useful links on the maintenance of slides? I haven't searched hard for this information yet but I'm sure it's something that should be checked regularly.
Other than a blown slideout 30 amp fuse, I never had an issue.
I used slideout lube all the time and kept the seals cleaned and conditioned.
It had a manual crank if the electric motor failed.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
Same here... I have a topper over the slide, but I need to get some dry lube for the mechanisms and do some much needed maintenance.
I don't know it it's just me, but in the back of my mind, knowing I haven't lubed the slide drive, it seems slow... I'm sure its just me, but I'll lube it up just for piece of mind...
__________________
2013 Palomino Stampede 23S HTT
2015 Dodge Ram 1500 6" lift rolling on 35's
I haven't crawled under the open slide to have a look yet... but from what I've gathered, we need to use a dry lube, I've seen many different suggestions, but I think I'm going to go with CRC Power Lube with PTFE
__________________
2013 Palomino Stampede 23S HTT
2015 Dodge Ram 1500 6" lift rolling on 35's
I have a IKSS and the dinette slide is getting a bit squeaky when going in and out. Anyone know what the mechanism looks like and which lube to use?
As I mentioned in post #2, a slideout lube is best.
It's a dry lube and various companies have them.
Got mine at Wal-Mart.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
I don't know it it's just me, but in the back of my mind, knowing I haven't lubed the slide drive, it seems slow... I'm sure its just me, but I'll lube it up just for piece of mind...
I lubed up the tracks /runners a little last night... I then ran it in and out a few times... maybe it's my imagination, but to me it seems to slide in easier... Oh well, I'm glad I did this and will add it to the annual maintenance schedule
__________________
2013 Palomino Stampede 23S HTT
2015 Dodge Ram 1500 6" lift rolling on 35's