Just noticed that a piece of vinyl trim along my roof has fallen off and will need to be replaced, see attached. Can anyone tell me what what exactly I should be searching for? Thanks for any pointers.
__________________ Craig & Cath
2018 2902WS Rockwood Ultra Lite (with tons of Mods)
2022 F250 Lariat Super Cab, 7.3 gas w/10 Spd Xmsn
Equalizer Hitch w/4-Point Sway Control
Days camped since 2015(retirement): 1687
You should be able to just push it back into the channel. It is just a screw cover.
X2. And a little dab of ProFlexRV on the end to hold it in place.
__________________ Craig & Cath
2018 2902WS Rockwood Ultra Lite (with tons of Mods)
2022 F250 Lariat Super Cab, 7.3 gas w/10 Spd Xmsn
Equalizer Hitch w/4-Point Sway Control
Days camped since 2015(retirement): 1687
Available on eBay in dozens of colors. Add some sparkle to your trailer with red, blue, white, etc.
__________________
Larry
"Everybody's RV is not like your RV."
"Always take pictures with the button on the right."
"Always bypass the water heater before opening the low-point drains."
Sticks and Bricks: Raleigh, NC
2008 Cherokee 38P: at Ivor, VA permanently
Our 2016 TT showed some signs of deterioration of the trim strips along each side, down the curved front and across the back. I ordered a 100 ft roll via Amazon. It works great, looks great, and appears to be better quality than the original material. A dab of your choice goop, silicon, or such on the end will keep it from ripping out. No need to apply anything under the trim strip. It is there to cover the screws.
Interesting, FR parts sales gave me the "Extrusion guide" with all the metal/plastic you can order by the foot on their campers. This is not on it :/ Maybe they buy from Amazon Too
Linear Mode
