I just acquired a 2022 Flagstaff 228BHSE popup camper from the original owner, so no warranty coverage. I cannot get the cooktop burners to light. (It appears they've never been lit.) All other gas appliances work just fine. I suspect it may be the 'button' under the swing-away galley. Propane cutoff? Any suggestions?
Moved thread to the Tent Camper and Popup section since popups differ many ways, from other types of RVs.
__________________
Dan-Retired California Firefighter/EMT
Shawn-Musician/Entrepreneur/Wine Expert
and Zoe the Wonder Dog(R.I.P.)
2016 PrimeTime TracerAIR 255, pushing a 2014 Ford F150 SCREW XTR 4x4 3.5 Ecoboost w/Max Tow Package
4pt Equal-i-zer WDH and 1828lbs of payload capacity
I just acquired a 2022 Flagstaff 228BHSE popup camper from the original owner, so no warranty coverage. I cannot get the cooktop burners to light. (It appears they've never been lit.) All other gas appliances work just fine. I suspect it may be the 'button' under the swing-away galley. Propane cutoff? Any suggestions?
After you've checked all of the other stuff, remember that RV ranges have a secondary propane regulator, right under the cooktop. Never heard of one failing, but it's a (remote) possibility.
__________________
Larry
"Everybody's RV is not like your RV."
"Always take pictures with the button on the right."
"Always bypass the water heater before opening the low-point drains."
Sticks and Bricks: Raleigh, NC
2008 Cherokee 38P: at Ivor, VA permanently
I just acquired a 2022 Flagstaff 228BHSE popup camper from the original owner, so no warranty coverage. I cannot get the cooktop burners to light. (It appears they've never been lit.) All other gas appliances work just fine. I suspect it may be the 'button' under the swing-away galley. Propane cutoff? Any suggestions?
The "button" under the swing up galley is for cutting off 12V electricity power to the RV. Its there so you don't run down the battery because you forgot to turn off a switch and can't when its closed.
Outside of obstructions in the line or regulator failure on the stove I have no idea assuming is plumbed correctly.
Linear Mode
