Originally Posted by jwh4984
ok I have a perfectly leveled camper my 1 piece screen door fits where it should but there is an issue on the sides of the door. It seems like I have to pull the door frame over on both sides right about where the black twist locks secure the door at. If I don't pull the frame over it makes the door difficult to open. Anyone experience this the camper is down right now so no pics are available.
I'd take some pics.
My first 2716g door frame wasn't square and caused issues.
Also my old 2716g tent on the side of the door opposite the bunk, wasn't inserted into the bottom rail correctly. I had to loosen set screws and pull more tent over to the door.
Before pulling the tent over to the door, the door would have to be somewhat angled to get the velcro on the door.
2019 Ford F150
Race Red XLT Sport, CC, 4WD, 145" WB, 3.5L Ecoboost, 10 speed, 3.55 Locking Axle, 1830# Payload, 12,700# Tow Rating, pulling a 2020 Rockwood Premier 2716G Pop Up
, with a 14' box. Previously had 2012 Jayco Jay Flight 26BH
and 2008 Jayco Jay Flight 19BH
Travel Trailers. Also previously had 2007 Starcraft 2406 Pop Up with 12' box
and bathroom, Previously had 2005 Rockwood 2290 Pop Up with 12' box
and porta potty cabinet. Trucks and Trailers.