Hi, saw your post in the Solera "mods" 'I installed test jacks so I could easily monitor the voltage on either side of the transfer solenoid. (On this solenoid the house batteries are connected to one side and the Chassis battery is connected to the other. the BCC controls whether these two are tied together for charging purposes.) '. Was wondering what the solenoid looks like, as I want to float chg. the chassis bat from that point, if possible, during winter storage periods. There is a thread on the topic going back and forth on what you discuss in this mod and have a good grasp on, so I thought i'd ask your two cents. Thanks
This website is not affiliated with or endorsed by Forest River, Inc. or any of its affiliates. This is an independent, unofficial site.