I have a 2021 Used FR Salem Hemisphere HL and the furnace kicks on but kicks off shortly after. No Heat!. The Stove top works, the water heater works and the thermostat works for everything but the heater. The only access is below the fridge on the inside. There is no access for service from the outside, only the vents. I blew out the vents, took off the vent cover from the inside, and blew everything out. Open to suggestions!! I really don't want to take out the heater from the inside and pull all the vent lines as I know this will destroy those hoses. Open for suggestions!!
i have a Sierra fifth wheel with a suburban furnace. I turned it on and nothing at all happened. No noises at all. the fuse is ok and the thermostat seems to be working well can you tell me what to look for. its only 2 years old and had the circuit board replaced when i first got it. help
I have a Rockwood 2604. The furnace is a Suburban NT-30SP. It only clicks when I turn it on. I have cleaned and found nothing dirty . I ordered a new module and relay. Has anyone pulled theirs and replaced any of these parts? Thinking this is the problem.