Forest River Forums

Forest River Forums (https://www.forestriverforums.com/forums/)
-   General Tech and Repair (https://www.forestriverforums.com/forums/f110/)
-   -   Tank Heaters (https://www.forestriverforums.com/forums/f110/tank-heaters-110117.html)

DocRob 06-06-2016 02:59 PM

Tank Heaters
 
I have a Roo 17 and am considering putting on tank heaters sometime in the next year or so. I'm wondering what size (watts) that the factory uses and are they 12 or 120 volt. Got the blank on the control panel and was wondering if it was wired directly or via a relay. Anyone have a wiring diagram? Sorry for all the questions, but just trying to figure out if it was a practical project.

Mr. Dan 06-06-2016 04:35 PM

On my Wildcat, the little heater pads are 12v. Can't answer your other Qs.


Sent (I think)

lbrjet 06-06-2016 05:53 PM

We have seen 26-30 degrees overnight many times and I have never even turned ours on.


2010 F250 5.4L 3.73
2011 Flagstaff 831FKBSS
Equal-i-zer 4pt 12K

fonzie 06-06-2016 06:08 PM

1 Attachment(s)
Here is manual for my unit.....all 12 volts and only one switch to turn these on...

Computer Nerd 06-12-2016 05:43 PM

12 volts on my Sandpiper


Computer Nerd
2014 Chevy Silverado 3500 HD Duramax
2016 Sandpiper 35ROK

SeaDog 06-12-2016 05:51 PM

Mine are 12V the main switch provides power to the system and each pad has a snap disc stat to control the power to the pad.


All times are GMT -5. The time now is 02:27 AM.