garywilson

Can you make another pic that shows relationship a little better with roof and Maxxair? I used CampingWorld brand and they worked fine...

Check with company that made yours at home... see if they have a comparable that will fold as Murphy needs to. Good luck...

No. If you want to be close, follow trailer recommendation. If you want to be closer, weigh trailer and then go to website or look at...

"I've seen a number of replacement mechanisms but I'm unsure which one I will need." If you call ETrailer you can talk to a real person...

If all the bearing says is 'China', it doesn't say much. The bearing that failed (and all the others on the axles) just said 'China'...

Change out race and bearings on hot hub and see what happens. Try American bearings like Timken... if the bearing you pull off just says...

Mix should not be strong enough to hurt anything so don't worry about WH... I don't turn on WH until system is flushed the next day...

Perpendicular to shut off the hose. If you are wanting to include the WH in your service, shut off hose that joins hot and cold, open...

At the top of the slide: Super thin 'sheet' of plastic (like a gift card or a pocket calendar used to be made of) that will slide into...

Same here, FL. A little over is much better than a little under, provided your TV can handle it. You might want to attach your brake...

Well James... lots of free parking in Texas when the 'bad vibes' hit. That's why you have a RV with a bath, kitchen, and a bed. You can...

$6.99 for adapter https://www.amazon.com/s?k=usb+to+12v+adapter&crid=4A2XNBCUGCTI&sprefix=usb+to+12%2Caps%2C110&ref=nb_sb_ss_ts-doa-p_1_9

Is refrigerator running? Have an ice maker? Condensation drain solid and draining properly? I'd look to the refrigerator too...

I'd probably dry it off and try some Eternabond tape...it holds pretty well... no pressure there. It is difficult to get any caulk to...

Probably so....if you can determine ori you can match up and swap out parts... Most are pretty much universal... I like a larger blade...