Loose Slide Flange

[Bayviewrr]

It seems that the flange against the wardrobe slide on my 2606WS has come partially loose. See attached photo. It appears that it is attached with some sort of adhesive. Any advise on re-attaching? (Picture is sideways )

 

[Bob K4TAX]

Yes, I just replaced the weather strip and D gasket on our TT. I found that the double side tape as supplied was very poor and would not hold. Even on a clean surface. I resorted to using 6000 type adhesive. Had to be creative to hold it in place for a few hours while the adhesive cured.

Also, at the very top and inside the track, I installed a #6 x 1/2" self drilling screw to assure the top will not move.

Bob