New member Sierra 365SAQB

[Mindspeak2]

I bought the 365AQ two days ago and still learning how to get the slides in and the the jack levelers up. I'll keep looking but the trailer is not local and I need to know before going to the site.
I am retired maintenance mechanic for industrial machines so this little unit is not a problem, but I like to have knowledge before putting my effort to bring this baby home. 2014 Sierra 365AQB
The owners says that a circuit breaker is the cause but all I could find was the fuse. I did not see a led panel. I wasn't with the trailer long and just have a good visual on the hydraulic system. If there is a reset button as one post stated it was near the hydraulic unit. I didn't see it but I wasn't looking for it while there. Any help would be greatly appreciated.
Thanks for having this forum, I need to have access to people in the use of these trailers.
Mindspeak2

 

[Willhound]

Sorry, can't help with the issue, but welcome to the forum, some great people here, and at least my message will bump you up to the top..

 

[Mindspeak2]

You may be able to share this schematic for the Lippert hydraulic reversing relay.

 

[Reverse_snowbird]

The owners says that a circuit breaker is the cause but all I could find was the fuse. I did not see a led panel.

If they said that it's a circuit breaker, they might be referring to the circuit breakers in the power panel which is usually located near the floor of the trailer.

If you're traveling a long way from home, you might want to take a multimeter and perhaps have a mobile rv service meet you there. It's an expense, but they could probably diagnose the problem pretty easily and may have the parts to fix it.

Depending on how the previous owner maintained the unit, you might find that new batteries will solve many problems. Slides need charged batteries to work even if it's plugged in.
There probably isn't an led panel in a 2014. I could be wrong, but rigs that age usually have toggle switches.
I don't have your rig however.

Welcome to the forum!

 

[Mindspeak2]

I posted a schematic on the member photos. I'm still learning how use the site and cell phones. Thanks, and hopefully the schematic helps those like me. Not sure if it made uploading.