Slide and awning not working

[ScottWotring]

Hi all. I've got a 2023 rockwood geopro and the slide, awning and water pump aren't working on 12V or shore power. When I hit the extend slide button on the control panel I hear the lippert one panel clicking behind the microwave. Everything appears wired correctly (see photo). Fuses appear good in camper and under hitch. Same with circuit breakers. I'm totally stumped and we've got a family trip planned for this weekend. Any advice? Thank you!

 

[glen1971]

"Appears good" can be different than "is good". The trip indication on some of the breakers may be tough to spot. What voltages are you reading on the battery and circuit breakers under the frame? Measure from the negative post or the ground, as some have measured across the breaker, get zero volts, and are more stumped.

 

[ScottWotring]

Update: I had a short to ground on the feed wire that runs to the slide. Resolved

"Appears good" can be different than "is good". The trip indication on some of the breakers may be tough to spot. What voltages are you reading on the battery and circuit breakers under the frame? Measure from the negative post or the ground, as some have measured across the breaker, get zero volts, and are more stumped.

 

[glen1971]

Great find! Thanks for replying with a fix!